Landscaping
Artificial Turf Calculator
Estimate square footage and cost for artificial turf installation, including waste for seams and cuts.
Inputs
Live estimate
Turf coverage needed
500 sq ft
- Turf area
- 500 sq ft
- Roll width
- 15 ft
- Rolls across width
- 1
- Linear feet of turf
- 10 ft
Diagram
Live estimate
- Mathematical quantity
- 500 sq ft
- Cutting and seam layout
- +10% → 550 sq ft
- Field conditions
- Not applied
- Adjusted requirement
- 550 sq ft
- Ordering rule
- Round up to whole roll
- Suggested order
- 550 sq ft
Artificial turf rolls are cut to shape; seam layout drives real yardage above the geometric area.
What you actually need in the field, before rounding to a supplier-friendly ordering unit.
Estimator confidence
LowerArtificial turf rolls are cut to shape; seam layout drives real yardage above the geometric area.
Why this behavior applies: Artificial turf comes in fixed-width rolls with a pile direction. Seam layout, not the raw area, drives the yardage that actually gets installed.
- Pile direction — Pieces must all point the same way — one bad seam ruins a lawn.
- Roll width vs project width — A 15-ft roll on a 16-ft area doubles the yardage.
- Number of seams — More seams = more trim losses and more seaming tape.
- Plan seam layout before ordering — the wrong roll direction can add a full seam.
- Compact the sub-base to 95% before laying turf.
- Anchor turf with 40d galvanized nails or landscape staples every 6 inches on seams.
- Reversing grain direction between pieces — seams show badly.
- Skimping on the sub-base — turf reveals every low spot.
- Under-ordering infill after installation.
Smart tips
- Ordering 5–10% extra is standard on irregular layouts. Running short costs more than the excess.
How it's calculated
Material assumptions
- Turf ships in rolls, typically 15 ft wide.
- Add 10–15% waste for cuts and seams.
- Base recommendation: 3–4 inches of compacted DG or crushed stone.
Frequently asked questions
Related calculators
These results are estimates only. Confirm quantities, compaction, waste, and delivery requirements with your supplier or project professional before ordering materials.